[UCLA-LUG] eth0 problems
Mark James Fasheh
mfasheh
Thu, 6 Apr 2000 10:13:14 -0700
Are you completely sure the machine freezes up? Sometimes, it may seem like
that when the eth card is looking for a dhcp server. It should time out,
and if this is indeed the case, then there may be something wrong with your
ethernet settings. Try making sure that the card is plugged into the wall,
and tell us what type of card you have.
--Mark
On Thu, Apr 06, 2000 at 07:54:21AM -0700, Luis wrote:
> Hello out there, I was wondering if anyone out there could help me out. I
> installed red hat 6.0 on my machine. It works fine and it boots up fine. I
> upgraded to red hat 6.1, the installation went good. Right when i booted
> from the installation, i freezes up right when the interface eth0 starts.
> Would some tell me what i could do to fix this problem . I set the box to
> pick up a ip address. (DHCP) . most people tell me that i would have to set
> my card to read 10/100 . When you have time I would really enjoy if anyone
> could help me out.
>
>
> by Luis
>
> At 07:18 AM 4/6/00 -0700, you wrote:
>
> >Send Linux mailing list submissions to
> > linux@linux.ucla.edu
> >
> >To subscribe or unsubscribe via the web, visit
> > http://linux.ucla.edu/mailman/listinfo/linux
> >or, via email, send a message with subject or body 'help' to
> > linux-request@linux.ucla.edu
> >You can reach the person managing the list at
> > linux-admin@linux.ucla.edu
> >
> >When replying, please edit your Subject line so it is more specific than
> >"Re: Contents of Linux digest..."
> >
> >
> >Today's Topics:
> >
> > 1. Re: [LUG-Announce] Spring 2000 Linux Install Fest (witten)
> > 2. Re: .bash_profile and .bashrc files (pape@ph.ucla.edu)
> > 3. Re: .bash_profile and .bashrc files (LEE,JAMES WOON)
> > 4. Re: Getting Installed Linux to boot (tchow)
> > 5. Re: Getting Installed Linux to boot (tchow)
> > 6. Re: .bash_profile and .bashrc files (Todd A. Lyons)
> > 7. recycle bin (LEE,JAMES WOON)
> > 8. Re: recycle bin (mike chan)
> > 9. Re: recycle bin (Leonard R. Wayne)
> > 10. Re: Do Linux run on Athlon w/ 20 GB HD on UDMA 66? (Dan Helfman)
> > 11. Re: Re: [UCLA-LUG]Adobe Acrobat (Dan Helfman)
> >
> >--__--__--
> >
> >Message: 1
> >Date: Wed, 5 Apr 2000 10:24:43 -0700
> >From: witten <witten>
> >To: linux@linux.ucla.edu
> >Subject: Re: [UCLA-LUG] [LUG-Announce] Spring 2000 Linux Install Fest
> >Reply-To: linux@linux.ucla.edu
> >
> >On Wed, Apr 05, 2000 at 08:26:48AM -0700, Glenn Glazer wrote:
> > > Hi, Dan.
> > >
> > > Something you don't mention in the email or on the website is what time the
> > > meeting is.
> >
> >Good point. I've added the time info (11 am to 5 pm). Note that I *did*
> >already have it on the install fest details page.. I just forgot to put it
> >on the main page. :)
> >
> > >
> > > Best,
> > >
> > > Glenn
> > > (who has a 4-6 class on Monday)
> > >
> > > At 02:56 PM 4/4/00 -0700, you wrote:
> > > >The Spring 2000 Linux Install Fest will be on Saturday, April 15, in
> > > >Boelter Hall room 3811 at UCLA. For more information about the install
> > fest,
> > > >please see: http://www.linux.ucla.edu/events/installfest.php3
> > > >
> > > >This Monday, April 10, we'll have our regular meeting in Boelter Hall room
> > > >3811. We'll offer two presentations for the price of one: Java Basics and
> > > >Python Basics. This is your chance to learn about two powerful programming
> > > >languages.
> > > >
> > > >More information on the UCLALUG is available at http://www.linux.ucla.edu
> >
> >--
> >Dan Helfman
> >UCLA Linux Users Group: http://www.linux.ucla.edu
> >My GnuPG key: http://torsion.org/witten/public-key.txt
> >
> >--__--__--
> >
> >Message: 2
> >Date: Wed, 5 Apr 2000 10:33:07 -0700 (PDT)
> >From: <pape@ph.ucla.edu>
> >To: linux@linux.ucla.edu
> >Subject: Re: [UCLA-LUG] .bash_profile and .bashrc files
> >Reply-To: linux@linux.ucla.edu
> >
> > > Yes, I do completely log out of my system and relogin but it still does
> > 't work.
> > > Also, I put the line alias ls="ls -a --color" in the .bash_profile
> > and .bashrc
> > > under my home directory and in the /etc/bashrc file. The way it works
> > now is that,
> > > I need to type bash -login to pretend that this terminal is a login shell.
> > > Otherwise, the terminal from the toolbar icon in neither GNOME nor KDE
> > won't
> > > execute my .bash_profile and .bashrc files.
> >
> >What is the login shell for your user in /etc/passwd? gnome-terminal
> >should invoke bash as an interactive shell, meaning that ~/.bashrc is
> >sourced. If your login shell is set to /bin/sh for instance, bash will
> >not read .bashrc on invocation as an interactive shell.
> >
> >The only way bash wouldn't source .bashrc is if you gave it the -norc
> >option.
> >
> >
> >
> >--__--__--
> >
> >Message: 3
> >Date: Wed, 5 Apr 2000 10:35:11 -0700 (PDT)
> >From: "LEE,JAMES WOON" <jwlee@ucla.edu>
> >To: MIng Yu <myu@anderson.ucla.edu>
> >cc: linux@linux.ucla.edu
> >Subject: Re: [UCLA-LUG] .bash_profile and .bashrc files
> >Reply-To: linux@linux.ucla.edu
> >
> >Why don't you try rebooting? I just put alias ls='ls -a --color' in
> >/etc/bashrc and .bash_profile. I didn't work when I logged out and logged
> >back in but it started working once I rebooted.
> >
> >
> >On Wed, 5 Apr 2000, MIng Yu wrote:
> >
> > > Yes, I do completely log out of my system and relogin but it still does
> > 't work.
> > > Also, I put the line alias ls="ls -a --color" in the .bash_profile
> > and .bashrc
> > > under my home directory and in the /etc/bashrc file. The way it works
> > now is that,
> > > I need to type bash -login to pretend that this terminal is a login shell.
> > > Otherwise, the terminal from the toolbar icon in neither GNOME nor KDE
> > won't
> > > execute my .bash_profile and .bashrc files.
> > >
> > > Thanks.
> > >
> > > Ming
> > >
> > > Mark James Fasheh wrote:
> > >
> > > > Just curious, have you completely logged out of your system, then logged
> > > > back in? I don't think the bash init files are read everytime an
> > xterm, etc
> > > > is run, but they should inherit anything from your main login shell
> > (which
> > > > needs to be restarted to load the init files).
> > > > --Mark
> > > >
> > > > --
> > > > --------------
> > > > If we were meant to get up early, God would have created us with
> > alarm clocks.
> > > >
> > > > President, UCLA LUG
> > > > Mark James Fasheh <mfasheh@linux.ucla.edu>
> > > > http://www.exothermic.org
> > > >
> > > > _______________________________________________
> > > > UCLALUG Linux mailing list - Linux@linux.ucla.edu
> > > > http://linux.ucla.edu/mailman/listinfo/linux
> > >
> > >
> > > _______________________________________________
> > > UCLALUG Linux mailing list - Linux@linux.ucla.edu
> > > http://linux.ucla.edu/mailman/listinfo/linux
> > >
> >
> >
> >--__--__--
> >
> >Message: 4
> >Date: Wed, 5 Apr 2000 19:30:19 -0700
> >From: tchow <kodiak>
> >To: linux@linux.ucla.edu
> >Subject: Re: [UCLA-LUG] Getting Installed Linux to boot
> >Reply-To: linux@linux.ucla.edu
> >
> >On Wed, Apr 05, 2000 at 08:36:10AM -0700, Michael Daines wrote:
> > > Hello.
> > >
> > > I have linux installed on one of my hard disks, and it was set up as
> > > the only OS. Now, however, I have two hard disks (the second a much
> > > larger one which had to be sent out for repair). On this new hard
> > > disk, which is hda, I have WinNT4.0 and Win98Japanese. It uses the
> > > NT Loader to decide which operating system to start. My main problem
> > > is that I installed linux (RH6.1) on the smaller drive when it was
> > > hda, but now it is hdc. What do I need to do to boot up linux? I
> > > have a HOW-TO on putting the right files in the NT loader (boot.ini),
> > > but that doesn't help much. I know that the linux still works,
> >
> >why doesn't it help too much? the nt boot loader should be able to boot all
> >of your OSes.
> >
> > > because if I disconnect the bigger drive, I can start up just fine.
> >
> >i'm fairly sure the nt boot loader can solve your problems. however, i
> >would tackle this problem by installing LILO on the first drive (hda).
> >there's a multiboot howto that may help. make sure you make some rescue
> >disks before doing anything serious. if you don't want to install LILO on
> >/dev/hda, you could also make a bootdisk for linux with all your
> >requirements. i.e. root partition /dev/hdc etc
> >
> >tchow
> >
> >--__--__--
> >
> >Message: 5
> >Date: Wed, 5 Apr 2000 19:34:22 -0700
> >From: tchow <kodiak>
> >To: linux@linux.ucla.edu
> >Subject: Re: [UCLA-LUG] Getting Installed Linux to boot
> >Reply-To: linux@linux.ucla.edu
> >
> >On Wed, Apr 05, 2000 at 10:17:24AM -0700, elliot jordan wrote:
> > > Would it be possible to bring in my hard drive only and windows/linux cd's
> > > to the fest to get it installed together? thanks
> >
> >sure it may be possible. i would not recommend it. you're gonna have to
> >find somebody generous enough to lend his computer temporarily to you so we
> >can install it.
> >
> >and elliot...could you not reply to this email list when your message has
> >nothing to do with the thread? your last couple emails have either borrowed
> >the thread title from somewhere else or you have included messages that bear
> >no relevance to your message.
> >
> >tchow
> >
> >--__--__--
> >
> >Message: 6
> >Date: Wed, 05 Apr 2000 22:21:55 -0700
> >From: "Todd A. Lyons" <cannonball@usinter.net>
> >To: linux@linux.ucla.edu
> >Subject: Re: [UCLA-LUG] .bash_profile and .bashrc files
> >Reply-To: cannonball@usinter.net
> >Reply-To: linux@linux.ucla.edu
> >
> >"LEE,JAMES WOON" wrote:
> > >
> > > Why don't you try rebooting? I just put alias ls='ls -a --color' in
> > > /etc/bashrc and .bash_profile. I didn't work when I logged out and logged
> > > back in but it started working once I rebooted.
> >
> >Standard answer: because rebooting is for adding new hardware.
> > (adder: and starting new kernels)
> >--
> >Blue skies... Cannonball http://www.mrball.net
> >* One ring to rule them all, One ring to find them *
> >* One ring to bring them all, and in the darkness bind them *
> > Sauron
> >
> >
> >--__--__--
> >
> >Message: 7
> >Date: Wed, 5 Apr 2000 22:53:12 -0700 (PDT)
> >From: "LEE,JAMES WOON" <jwlee@ucla.edu>
> >To: linux@linux.ucla.edu
> >Subject: [UCLA-LUG] recycle bin
> >Reply-To: linux@linux.ucla.edu
> >
> >Hi,
> >
> >How do I make it so that whenever I rm files they automatically be stored
> >in temp directory. I guess I am asking for a recycle bin... Thanks.
> >
> >-James
> >
> >
> >
> >--__--__--
> >
> >Message: 8
> >Date: Wed, 05 Apr 2000 23:03:32 -0700
> >To: linux@linux.ucla.edu
> >From: mike chan <snotty@linux.com>
> >Subject: Re: [UCLA-LUG] recycle bin
> >du>
> >Reply-To: linux@linux.ucla.edu
> >
> >linux actually doesn't have a recycle bin... what you can do.. is use mv
> >(move) instead of delete if you so wish... delete is really delete... =)
> >
> >also, it should be noted that when you "move" the file, it usually doesn't
> >move at all.. just the information regarding the file (the directory it
> >resides in) is changed... that's why when you move a 600 meg file on the
> >same partition, it executes VERY quickly, whereas a copy takes a long time..
> >
> >so, insted of deleting, you can make an alias to move your files...
> >
> >or something like that... =) assuming /recycle is created, and world
> >writeable, etc.etc.etc.
> >
> >mike
> >
> >At 10.53 PM 4.5.2000 -0700, you wrote:
> > >Hi,
> > >
> > >How do I make it so that whenever I rm files they automatically be stored
> > >in temp directory. I guess I am asking for a recycle bin... Thanks.
> > >
> > >-James
> > >
> > >
> > >
> > >_______________________________________________
> > >UCLALUG Linux mailing list - Linux@linux.ucla.edu
> > >http://linux.ucla.edu/mailman/listinfo/linux
> > >
> >snotty e/c
> >PGP Key http://www.linuxvalue.com/pgp.html
> >
> >--__--__--
> >
> >Message: 9
> >Date: Tue, 04 Apr 2000 14:07:01 -0700
> >From: "Leonard R. Wayne" <lrwayne@earthlink.net>
> >Reply-To: lwayne@alumni.ucsd.edu
> >To: linux@linux.ucla.edu
> >Subject: Re: [UCLA-LUG] recycle bin
> >Reply-To: linux@linux.ucla.edu
> >
> > > How do I make it so that whenever I rm files they automatically be stored
> > > in temp directory. I guess I am asking for a recycle bin... Thanks.
> >
> >If you are using t-shell, you could add this line to your .tcshrc file:
> >
> >alias rm "mv \!* /recycle_bin"
> >
> >(after you 'mkdir recycle_bin', of course). Also remember to
> >'source .tcshrc' after modifying .tcshrc.
> >
> >- Len
> >
> >--__--__--
> >
> >Message: 10
> >Date: Thu, 6 Apr 2000 02:29:26 -0700
> >From: Dan Helfman <witten@linux.ucla.edu>
> >To: linux@linux.ucla.edu
> >Subject: Re: [UCLA-LUG] Do Linux run on Athlon w/ 20 GB HD on UDMA 66?
> >Reply-To: linux@linux.ucla.edu
> >
> >On Wed, Apr 05, 2000 at 09:34:02AM -0700, Yu Ching Tong wrote:
> > > Hi:
> > > I post this because I experience numerous failure when installing
> > > Linux (Distribution: Red Hat 6.1 from Cheap byte) It crash when the
> > > actual transfer of the package from CD to HD. The only work around I
> > > got right now is reduce the partition of Linux to use less than the
> > > 1024 cylinder.
> > >
> > > Is there a patch or something that allow UDMA 66 and larger partition?
> > > ( I can only use the fdisk program back in RedHat 5.1 to partition my
> > > HD, than go back to install 6.1)
> >
> >What kind of error messages, if any, are you seeing? Red Hat 6.1 does not
> >support UDMA 66 by default. You can either 1) download drivers from your
> >motherboard/controller manufacturer and use those during installation, or 2)
> >temporarily set your drive into DMA 33 mode for the installation and then
> >patch the kernel afterwards for UDMA 66 support. Then you can switch back to
> >UDMA 66.
> >
> > >
> > > Also, is there are know problem w/ Athlon CPU?
> >
> >Not as far as I know.
> >
> > >
> > > Thanks
> > > Yu-Ching Tong
> > > Apr. 5, 2000
> >
> >--
> >Dan Helfman
> >UCLA Linux Users Group: http://www.linux.ucla.edu
> >My GnuPG key: http://torsion.org/witten/public-key.txt
> >
> >--__--__--
> >
> >Message: 11
> >Date: Thu, 6 Apr 2000 02:32:02 -0700
> >From: Dan Helfman <witten@linux.ucla.edu>
> >To: linux@linux.ucla.edu
> >Subject: Re: [UCLA-LUG] Re: [UCLA-LUG]Adobe Acrobat
> >Reply-To: linux@linux.ucla.edu
> >
> >On Tue, Apr 04, 2000 at 05:35:38PM -0700, elliot jordan wrote:
> > > Hi guys- I loaded Acroread from the source cd and also downloaded Adobe
> > > Acrobat4 (into /opt) from their website. Can't get it going. Any
> > suggestions
> > > would be much appreciated. Must be some easy step I'm overlooking. I use
> > > Caldera Openlinux 2.3 (2.2.10). Is there a special untar/unzip command or
> > > install command? Thanks
> >
> >What format is the file you downloaded in? .tar.gz? RPM? DEB?
> >
> >--
> >Dan Helfman
> >UCLA Linux Users Group: http://www.linux.ucla.edu
> >My GnuPG key: http://torsion.org/witten/public-key.txt
> >
> >
> >
> >--__--__--
> >
> >_______________________________________________
> >UCLALUG Linux mailing list - Linux@linux.ucla.edu
> >http://linux.ucla.edu/mailman/listinfo/linux
> >
> >
> >End of Linux Digest
>
>
>
> _______________________________________________
> UCLALUG Linux mailing list - Linux@linux.ucla.edu
> http://linux.ucla.edu/mailman/listinfo/linux
--
--------------
If we were meant to get up early, God would have created us with alarm clocks.
President, UCLA LUG
Mark James Fasheh <mfasheh@linux.ucla.edu>
http://www.exothermic.org